Axmann Fördersysteme GmbH Jürgen Ruckriegel Baumeisterallee 24-26 04442 Zwenkau Deutschland +49 34203/5970

Roller Conveyor Type 63.30 / 63.50

This accumulation roller conveyor is ideal for the transportation of cardboard boxes, bins, containers, baskets and pallets. The accumulation of goods results from the friction principle, i.e. in case of accumulation, the rollers slide along their axle. The driving force affecting the rollers depends on the weight of the unit loads. The friction force between the rollers and their corresponding axles increases or decreases proportionally to the weight affecting the rollers. Independent of the load, the transportation force can be adjusted at each roller – either in advance or at the customer’s – by using a pressure spring. The conveying direction is reversible at any time. The frame consists of extruded aluminum profiles with integrated “T” profile slots for easy attachment of peripheral items. The rollers of the roller conveyor type 63.30 are made from galvanized steel tube, standard diameter 50 mm. The conveyor’s roll-to-roll connections feature duplex sprockets and are driven by a 1/2” x 5/16” precision roller chain assuring efficient power transmission. The gear motor mounted laterally is generally dimensioned for Y2 HP kW to 230/460 VAC and operates at 400 V / 60 Hz, 3-phase. The guide rollers of the roller conveyor type 63.50 are made from high-strength polyamide (stainless steel is also available.) Set collars and pressure springs keep the guide rollers in the right position. However, they can be adjusted for transporting unit loads with different sizes and weights.

Technical Data

Load range

0 N/m – 3500 N/m (0 kg/m – 350 kg/m)
(0 Lb/ft – 235 Lb/ft)

Speed (V)

0.1 m/s – 0.4 m/s (0.3 ft/s – 1.3 ft/s)
6 m/min – 24 m/min (19.7 ft/min – 78.7 ft/min)

Roller pitch (T)

75.5 / 82 / 101.5 / 126.5 / 151.5 mm (3.0 / 3.2 / 4.0 / 5.0 / 6.0”)

Betweem frame (BF)

200 – 1500 mm (7.9” – 4.9 ft)

Max. number of rollers per drive


Module length (ML)

ML = N x P


3-phase gear motor, 1/2, 3/4, 1 HP, 230/460 VAC, 60 Hz

Power Transmission

1/2” x 5/16” precision roller chain, roll-to-roll

Roller type

Galvanized steel rollers Ø 50 mm, (2”) with ball bearings 6004ZZ
in the side frames. Type 63.30: guide rollers Ø 80 / 50 mm, (2.0 / 3.1”) made from polyamide.

Temperature range

0°C to 45°C ambient. (23°F to 122°F)

Scope of supply

Each roller conveyor module is supplied fully assembled, without support stands. Each drive module is equipped with a gear motor, as described above.