Axmann Fördersysteme GmbH Jürgen Ruckriegel Baumeisterallee 24-26 04442 Zwenkau Deutschland +49 34203/5970

Accumulation roller conveyor type 53.30/53.50

This accumulation roller conveyor is ideal for the transportation of cardboard boxes, bins, containers, baskets and pallets. The accumulation of goods results from the friction principle, i.e. in case of accumulation, the rollers slide along their axle. The driving force affecting the rollers depends on the weight of the unit loads. The friction force between the rollers and their corresponding axles increases or decreases proportionally to the weight affecting the rollers. Independent of the weight, the transportation force can be adjusted at each roller – either in advance or at the customer’s – by using a disk spring. The conveying direction is reversible at any time. The frame consists of extruded aluminum profiles with integrated “T” profile slots for easy attachment of peripheral items. The rollers of the roller conveyor type 53.30 are made from galvanized steel tube, standard diameter 50 mm (2”). The conveyor’s roll-to-roll connections feature duplex sprockets and are driven by a 1/2” x 5/16” precision roller chain assuring efficient power transmission. The gear motor mounted laterally is generally dimensioned for 1/3 HP to 3/4 HP and operates at 230/460 VAC, 60 Hz, 3-phase. The guide rollers are made from high-strength polyamide (stainless steel is also available). Set collars and disk springs keep the guide rollers in the right position. However, they can be adjusted for transporting unit loads with different sizes and weights.

Technical Data

Load range

0 N/m – 1000 N/m (0 kg/m – 100 kg/m) (0 Lb/ft – 67 Lb/ft)

Speed (V)

0.1 / 0.2 / 0.3 m/s (6 / 12 / 18 m/min) (0.3 / 0.7 / 1.0 ft/s) (19.7 / 39.4 / 59.1 ft/min)

Between frame (BF)

210 mm – 1210 mm (8.3” – 4 ft)

Roller pitch (T)

63 / 75.5 / 82 / 101.5 / 126.5 / 151.5 mm (2.5 / 3.0 / 3.2 / 4.0 / 5.0 / 6.0“)

Max. number of rollers per drive


Module length (ML)

ML = N x T

Temperature range

0°C to 45°C ambient (23°F to 122°F)

Motor protection

IP 54


3-phase gear motor, 1/3-3/4 HP, 230/460 VAC, 60 Hz


1/2” x 5/16” precision roller chain, roll-to-roll

Roller type

5330: galvanized steel rollers Ø 50 mm (2”), with ball bearings 6004ZZ in the side profiles.

5350: guide roller Ø 80 mm (3.1”), roller Ø 50 mm (2”), made from polyamide.


It is NOT recommended to incline or decline driven roller conveyors

Scope of supply

Each roller conveyor module is supplied fully assembled, without support stands, but

with end caps. Each drive module is equipped with a gear motor, as described above